TESTER FOR SOLENOIDS & INJECTORS

TSOL1

TSOL1 is a small microprocessor device for solenoids and injectors test in the automotive industry.

 

It works with a12V external battery and is able to verify ON / OFF or PWM solenoids of all types, as well as the electromagnetic injectors for gasoline or diesel engines (but not the piezoelectric injectors).

 

Connecting a Hall sensor to the camshaft allows for phased adjustable injections.

 

It is self-protected against overload or short-circuit of the solenoid coil and the protections intervention is appropriately signalled.

 

The device provides following measures: ohmic resistance coil, battery voltage, current drawn by the component under test, engine rpm.

 

These are the main features:

 

  • Specialized machinery, but low cost

  • Power supply 10 - 15VDC, with reverse battery protection

  • Output Current: 0 to 8A

  • Measuring current resistance: 15mA

  • Adjusting DUTY PWM (+/- keys DUTY): from 1% to 100%, in steps of 1%

  • Adjusting frequency PWM (SHIFT + keys DUTY +/-): 20Hz to 1200Hz, in steps of 10 Hz

  • Adjusting DURATION INJ or HJP (+/- keys DUTY): from 2 ms to 8 ms, in steps of 1 ms

  • Adjusting TURNS INJ or HJP (SHIFT + keys DUTY +/-): from 600 to 6000rpm, in steps of 60rpm

  • Adjusting DURATION IF (+/- keys DUTY): from 20 ° to 180 °, in steps of 2 ° (150_6000 RPM)

  • Adjusting DELAY IF (SHIFT + keys DUTY +/-): 0 ° to 160 °, in steps of 2 °

  • Measure resistance solenoid: 0 to 75.0 ohms, with resolution 0.1 ohms

  • Solenoid measuring voltage: 0 to 15V with a resolution 0.1V

  • Solenoid measuring current: 0 to 8,9A, with 35mA resolution

  • Protections: reverse battery, overcurrent, low resistance solenoid (short)

  • 32 characters backlit alphanumeric display 

Main Features

  • It works with 12V external battery

  • It is able to test solenoids ON / OFF or PWM of all types

  • Connecting a Hall sensor to the camshaft allows for phased adjustable injections.

  • It is self-protected against overload or short-circuit of the solenoid coil

  • The intervention of the protections is appropriately marked.

  • Measures performed: ohmic resistance coil, battery voltage, current drawn by the component under test, engine rpm.

Author Micropi Elettronica Srl - All Rights reserved

VAT Nr. 05433851218

Micropi Elettronica made in Italy
30 Years Experienced Industrial Automation